DIY Garage Door Springs Repair: What You Need to Know
Garage door springs are an essential part of your garage door system that allow the door to open and close with ease. Over time, springs can become worn out and need replacing. For many homeowners, garage door spring repair is a DIY project they can tackle themselves. Here are some tips for successful garage door spring repair.
Content
Tools and Materials
You will need a few basic tools and materials to complete a garage door spring repair. Make sure to have gloves, safety glasses, a winding bar or socket wrench for winding the springs, and replacement springs that match your existing springs. It’s also a good idea to have lubricant for the moving parts.
Safety First
Garage door springs are under very high tension and can cause serious injuries if they break. Before beginning any work, disconnect the springs from the garage door and secure them in the unwinding position using locking pliers. This reduces the risk of injury if the springs were to slip out of position.
Removing the Old Springs
Use the winding bar or socket wrench to unwind the old springs all the way. Once fully unwound, you can remove any retaining clips or bolts holding the springs in place. Carefully remove the old springs and inspect the garage door brackets and mounting points before installing the new springs.
Installing the New Springs
Mount the new springs in the same position as the old ones. Use locking pliers to hold the new springs in the unwinding position as you position them in the brackets. Then begin winding the springs using the winding tool, taking care to wind evenly. Check that the springs are seated properly in the brackets before removing the locking pliers.
Adjusting Spring Tension
New springs may need to be adjusted for proper garage door function. The door should be able to be easily raised and lowered by hand. If it’s too difficult, the springs need additional winding to reduce tension. If the door doesn’t stay up on its own, more winding is required. Adjust carefully until correctly balanced.
With proper tools and safety precautions, DIY garage door spring repair is achievable for many homeowners. Replacing worn springs yourself can save money versus a service call. Just be sure to inspect all components and adjust spring tension correctly. For residents of Short Pump, Virginia, a spring repair pro can also be consulted.
FAQs
How often should I replace my garage door springs?
Most springs last 5-10 years with regular use but can fail sooner if the door is heavily used. Inspect them annually for signs of wear.
Is it safe for me to replace the springs myself?
As long as all safety precautions are followed, spring replacement can be a DIY project. However, if springs are over-tensioned or brackets are worn, it’s best to call a pro.
